NASA Death Star Sweatshirt Star Wars Superweapon S-3XL

This sweatshirt is Made To Order. We use DTG Technology to print on to Front NASA Death Star Sweatshirt.

Sweatshirt descriptions

• 8.0 oz., 50/50 cotton/polyester
• Reduced pilling and softer air-jet spun yarn
• Double-lined with matching drawcord (adult style only)
• 1×1 athletic rib kint cuffs and waistband with spandex
• Double-needle stitching throughout

Washing Instructions:

• Please turn the sweatshirt inside out and wash on a COLD cycle.
• Do not use bleach or any fabric softener.

SIZE CHART

PLEASE READ CAREFULLY THE SIZE CHARTS BELOW, IT’S REFER TO UNISEX SIZE CHARTS

Available size :
S, M, L, XL, XXL, XXXL

UNISEX SIZE CHART:
Measurement in inches :
S : Width = 20.0″, Length = 25.4″
M : Width = 22.0″ , Length = 26.4″
L : Width = 24.0″ , Length = 27.4″
XL : Width = 26.0″, Length = 28.4″
XXL: Width = 28.0″, Length = 30.00″
XXXL: Width = 30.0″, Length = 31.05-31.50″

Note : Width = armpit to armpit

Direct to garment printing, a.k.a DTG printing, digital direct to garment printing, digital apparel printing, and inkjet to garment printing, is a process of printing on textiles and garments using specialized or modified inkjet technology. The two key requirements of a DTG printer are a transport mechanism for the garment and specialty inks (inkjet textile inks) that are applied to the textile directly and are absorbed by the fibers.

PLEASE CHECK OUR SHOP FOR MORE UP TO DATE FASHION sweatshirt or sweater!

Happy Shopping !!!